Sony DVP-K360 - Manual (Page 71)

71
Additional Information
Specifications
CD/DVD player
Laser Semiconductor laser
Signal format system
NTSC/PAL (See page 9 to switch.)
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
115 dB (LINE OUT AUDIO connectors
only)
Harmonic distortion
0.003 %
Dynamic range
103 dB (DVD)
99 dB (CD)
Wow and flutter
Less than detected value
(±0.001 % W PEAK)
Outputs and inputs
LINE OUT
AUDIO (1, 2)
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)
LINE OUT
VIDEO (1, 2)
S VIDEO OUT
COMPONENT
VIDEO OUT
(Y, C
B , C R )
MIC 1, 2
General
Power requirements
220 to 240 V AC, 50/60 Hz
220 V AC, 50/60 Hz
110 V AC, 60 Hz
See page 2 for further informations.
Power consumption
14 W
13 W
See page 2 for further informations.
Dimensions (approx.)
430
Ч
74
Ч
264 mm (w/h/d)
incl. projecting parts
Mass (approx.)
2.8 kg
Operating temperature
5 ˚C to 35 ˚C
Operating humidity
25 % to 80 %
Supplied accessories
See page 7.
* The signals from the LINE OUT AUDIO connectors are measured.
When you play PCM sound tracks with a 96 kHz sampling
frequency, the output signals from the DIGITAL OUT OPTICAL
and COAXIAL connectors are converted to 48 kHz (sampling
frequency).
Design and specifications are subject to change without notice.
Jack
type
Phono
jacks
Optical
output
connector
Phono
jack
Phono
jacks
4-pin
mini DIN
Phono
jacks
Phone
jacks
Output
level
2 Vrms
(at 50 kilohms)
–18 dBm
0.5 Vp-p
1.0 Vp-p
Y: 1.0 Vp-p
C: 0.3 Vp-p
(PAL)
C: 0.286 Vp-p
(NTSC)
Y: 1.0 Vp-p
C B , C R :
0.7 Vp-p
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
75 ohms,
sync negative
75 ohms