Sony DVP-K360 - Manual (Page 8)

8
Getting Started
TV Hookups
This connection is for listening to the sound through TV
speakers (L: left, R: right). Refer to the instructions
supplied with the component to be connected.
Some setup adjustments are necessary for the player. If
you run Quick Setup (page 14), you can make the
minimum number of basic adjustments to the player.
z You can enjoy surround sound using your TV’s built-in
speakers
You can use sound imaging to create virtual rear speakers from
the sound of built-in TV speakers without using actual rear
speakers (TVS: TV Virtual Surround). For details, see page 35.
Required cords
Audio/video connecting cord (supplied) (1)
S video cord (not supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate connectors on the components: Yellow
(video) to Yellow, Red (right) to Red and White (left) to White. Be
sure to make connections firmly to avoid hum and noise.
If your TV has an S video input connector, connect the
component via the S VIDEO OUT connector using an S video
cord (not supplied). You will get a better picture.
Refer to the instructions supplied with the TV to be connected.
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
S VIDEO
VIDEO
AUDIO
INPUT
L
R
DIGITAL OUT LINE OUT S VIDEO
OUT
COMPONENT
Y
VIDEO 1
VIDEO 2
R – AUDIO 1 – L
OPTICAL
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
R – AUDIO 2 – L
C B
C R
VIDEO OUT
CD/DVD player
To mains
TV
To LINE
OUT
AUDIO
To audio input
To S VIDEO
OUT
To S VIDEO
input
To LINE
OUT
VIDEO
To video input
: Signal flow