Remote control code, Remote control code part names and functions – Sanyo PLC-XF1000 User Manual
Page 16
16
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 52.
1
2
Remote Control Code
Part Names and Functions
Flip the Reset Switch to "Use position" in the
compartment lid on the back of the remote control.
While holding down the MENU button, press
and release the IMAGE ADJ. button the number
of corresponding times you would like to set the
number of the remote control code for the projector.
Remote Control Code
Number of Times
Pressing IMAGE ADj .
button
Code 1
1
Code 2
2
Code 3
3
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
Reset position
Use position
IMAGE ADj .
button
MENU button
Reset switch