Sanyo PLC-XF1000 - Manual (Page 64)

64
Turn off the projector, press the Main On/Off Switch to Off
and unplug the AC power cord from the AC outlet before
cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Cleaning the Projector Cabinet
Turn off the projector, press the Main On/Off Switch to Off
and unplug the AC power cord from the AC outlet before
cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small amount
of mild detergent and finish with a soft dry cleaning cloth.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case or cover to protect it from dust and
scratches.
Cleaning the Projection Lens
Maintenance and Care
CAUTION
Do not use any flammable solvents or air sprays
on the projector and in its vicinity. The explosion or
fire hazard may occur even after the AC power cord
is unplugged because the temperature inside the
projector is extremely high due to the lamps.
In addition, there is a risk that the internal parts
may be damaged not only by the flammable air
spray but also by the cold air.