Sony CDX-C710 - Manual (Page 10)

10
Actual total number: Sony CDX-C710 (E) 3-856-120-12(2)
EN
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD or MD
changer with the rotary remote.
By pressing the button (the
SOURCE button)
Every time you press (SOURCE), the
source changes as follows:
FM1 n FM2 n AM n CD1 n CD2 n MD1 n
MD2 n TV* n AUX* (video)
* When the optional TV tuner is connected.
Tip
When the POWER SELECT switch is set to position B,
you can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
(SOURCE)
Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item
changes as follows:
z Station name* z Frequency z Clock
* If the station name of a station is not stored, “NO
NAME” appears in the display for one second.
Erasing the station name
1
Tune in any station and press (LIST) for
two seconds.
2
Press (DSPL) for two seconds.
3
Press (+) or (–) to select the name that
you want to erase.
4
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (LIST) for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
name
— List-up
1
Press (LIST) momentarily.
The name assigned to the station currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired station.
3
Press (5) (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode. To
turn off the display, press (DSPL).
SUR 3
FM1
EQ
WRKISS
SUR
ENTER
3
LST
EQ
WRKISS