Siemens GigasetS44 - Manual (Page 22)

21
Handset settings
Gigaset S44 / MEA engl / A31008-M1611-A611-1-7619 / start_guide_time.fm / 07.06.2005
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when handsfree talking is set
(page 10).
You are conducting an external call.
t
Open menu.
r Select volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
If t is assigned a different function, e.g.
toggling:
v
Open menu.
Volume Select and press §OK§ .
Configure setting (see above).
Changing ringtones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u Ringtones:
You can select any sound from the
Sound Manager (page 22).
You can configure the following functions
with different ringtones:
u Ext. Calls : For external calls
If you wish to change the settings for
ISDN base stations, please consult the
base station user guide.
u Internal Calls : For internal calls
u Appointments : For set appointments
(page 23)
u Alarm : For a pre-set wake-up call
(page 23)
u All : The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of ringing. For external calls, you
can choose to have the name of the caller
announced. This requires the correspond-
ing voice pattern to be recorded before-
hand (page 14).
v
¢
ï
¢
Ringer Settings
q Select setting, e.g. Ext. Calls ,
and press §OK§ .
r Set volume (1–6).
s Scroll to the next line.
r Select melody.
r Announce activate or deacti-
vate.
¤
Save changes (page 10).
In idle status, you can also open the menu
Ringer Settings by pressing t briefly.
Same settings for all functions
v
¢
ï
¢
Ringer Settings
¢
All
¤
Set volume and ringtone (see "Settings
for individual functions").
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
Activating/deactivating the ringtone
Before answering a call or while your
handset is in idle status, it is possible for
you to cancel the ringtone permanently or
for the current call. The ringtone cannot
be re-activated while an external call is in
progress.
Cancelling the ringtone permanently
* Press the star key and hold
until you can no longer hear
the ringtone.
The Ú icon appears in the display.