Pc interface, Writing names (without predictive text), Pc interface writing and editing text – Siemens GigasetS44 User Manual
Page 30: Writing and editing text, General specifications
29
Appendix
Gigaset S44 / MEA engl / A31008-M1611-A611-1-7619 / start_guide_time.fm / 07.06.2005
General specifications
PC Interface
ww.siemens.com/gigasets44). You
can access your handset's directory and
load sounds from the computer on to the
handset.
During the transfer of data between hand-
set and PC you will see
Data Transfer
on the
display. During this time it is not possible
to use the keypad and incoming calls will
be ignored.
Writing and editing text
The following rules apply when writing a
text:
u
Control the cursor with
u v t s.
u
Characters are added to the left of the
cursor.
u
Press the star key
* briefly to
switch from "Abc" mode to "123" and
from "123" to "abc" and from "abc" to
"Abc" (upper case: 1st letter upper
case, all others lower case). Press the
star key
* before entering the let-
ter.
u
Press and hold the star key
*:
Shows the selection line of the charac-
ters assigned to the star key.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Writing names (without predictive text)
When you press a key and hold it, the
characters of that key appear in the bot-
tom display line and are highlighted one
after the other. When you release the key
the highlighted character is inserted into
the input field.
You can see in the display whether upper
case, lower case or digits is selected.
Dimensions,
handset
141 x 51 x 28 mm
(L × W × H)
Weight of handset
with battery
120 g