Symbol Technologies P470 - Manual (Page 102)

5-32
P470/370 RF Scanner Product Reference Guide
Decode UPC/EAN Supplemental Redundancy
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number
of times a symbol without supplementals is decoded before transmission. The range is from
two to 20 times. Five or above is recommended when decoding a mix of UPC/EAN symbols
with and without supplementals, and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar
codes beginning on page
5-104 . Single digit numbers must have a leading zero. If you
make an error, or wish to change your selection, scan CANCEL on page 5-106.
DECODE UPC/EAN
SUPPLEMENTAL REDUNDANCY