Symbol Technologies P470 - Manual (Page 141)

5-71
Parameter Menus
Set Lengths for Codabar (Continued)
Length Within Range - This option allows you to decode a code type within a
specified range. For example to decode Codabar symbols containing between 4 and 12
characters, first scan Codabar Length Within Range. Then scan 0, 4, 1 and 2 (single digit
numbers must always be preceded by a leading zero). Numeric bar codes begin on page
5-104 . If you make an error, or wish to change your selection, scan CANCEL on page 5-
106.
CODABAR - LENGTH WITHIN RANGE
Any Length - Scanning this option allows you to decode Codabar symbols containing any
number of characters.
CODABAR - ANY LENGTH