Symbol Technologies P470 - Manual (Page 166)

5-96
P470/370 RF Scanner Product Reference Guide
ASCII Format
This parameter allows the cradle to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
7-BIT
*8-BIT
Intercharacter Delay
Select the intercharacter delay option matching host requirements. The intercharacter
delay gives the host system time to service its receiver and perform other tasks between
characters. The delay period can range from no delay to 99 ms in 1 ms increments (if you
are using a cradle and RTS/CTS handshaking, the delay period can range from 5 ms to 99
ms). After scanning the bar code below, scan two bar codes beginning on page
5-104 to
set the desired time-out. If you make an error, or wish to change your selection, scan
CANCEL on page 5-106.
INTERCHARACTER DELAY