Symbol Technologies P470 - Manual (Page 12)

x
P470/370 RF Scanner Product Reference Guide
• Italics are used to highlight specific items in the general text, and to identify
chapters and sections in this and related documents.
• Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as
numbered lists.
Related Publications
• P470/P370 RF Scanner Quick Reference Guide, p/n 72-38493-xx
• PL 370/470 Cradle Quick Reference Guide, p/n 72-38494-xx
• MCL Designer for Phaser Series User’s Guide, p/n 70-37689-xx.
Service Information
If you have a problem with your equipment, contact the Symbol Support Center for your
region. See page xi for contact information. Before calling, have the model number, serial
number, and several of your bar code symbols at hand.
Call the Support Center from a phone near the scanning equipment so that the service
person can try to talk you through your problem. If the equipment is found to be working
properly and the problem is symbol readability, the Support Center will request samples of
your bar codes for analysis at our plant.
If your problem cannot be solved over the phone, you may need to return your equipment
for servicing. If that is necessary, you will be given specific directions.
Note: Symbol Technologies is not responsible for any damages incurred
during shipment if the approved shipping container is not used.
Shipping the units improperly can possibly void the warranty. If the
original shipping container was not kept, contact Symbol to have
another sent to you.