Symbol Technologies P470 - Manual (Page 33)

3-1
Chapter 3
Operation
Introduction
This chapter covers how to use the cordless Phaser scanner.
Default Application
The cordless scanner is shipped from the factory with a default scan and transmit
application.
This application allows users to scan and view data, enter quantities, and manually enter
alphanumeric data.
When the unit is powered up, it displays the system start-up banner. Alternatively, the
scanner can be reset manually by pressing the <FUNC> key, then the <*> key. When the
scanner is powered up or reset, the system banner appears as follows:
Symbol Technologies
Phaser RF