Sony KP-65XBR10W - Manual (Page 42)

38
D:\810nouhin\4080199111\408019911KP57XBRUC\02US-COV-KP57XBRUC\09CTV.fm masterpage:Left
Model name1[KP-57XBR10W] Model name2[KP-65XBR10W]
[4-080-199-11 (1)]
ALL ON:
Select to listen to the sound from the projection
TV speakers alone.
L/R OFF:
Select to turn off the projection TV left and right
speakers and listen to the left and right channel
sounds through a separate audio system’s speakers.
ALL OFF:
Select to turn off the projection TV speakers and
listen to the projection TV’s sound only through an
external audio system’s speakers.
CENTER IN:
Select to use the projection TV center speaker as
center speaker when you connect an amplifier with
a Dolby Pro Logic decoder. (see “Connecting an
Amplifier That Supports Dolby Pro Logic
Decoder” on page 22)
EFFECT can only be set when SPEAKER is set to
ALL ON or L/R OFF.
; PRO LOGIC:
Produces superb theater-like surround effects.
Most effective for programs encoded in Dolby
surround.
; 3 STEREO:
Produces a dynamic three dimensional sound
without using the rear speakers. The sound of the
rear channel is output from the front speakers.
SRS 3D MONO:
Adds a surround-like effect to mono programs.
LIVE:
Produces surround effects with the atmosphere of a
concert hall.
GAME:
Produces maximum audio impact. Most effective
for video games.
OFF:
Normal stereo or mono reception.
After selecting one of the surround modes, adjust
the volume of each speaker so that the sound will
be even and natural. (see “Adjusting the Speaker
Volume for Customized Surround Mode” on the
right column)
To restore the To restore the To restore the To restore the factory settings factory settings factory settings factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
However, EFFECT is not reset to the factory
setting even if you press RESET.
After you set EFFECT to one of the modes, adjust
the volume of the front, center and rear speakers to
the same level so that the projection TV’s sound
will be even and natural. For ;PRO LOGIC and
;3 STEREO, adjust the speaker volume using
the test tone feature.
Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume
1 Connect the rear speakers (not supplied).
For details, see “Mounting the Rear Speakers
(not supplied)” on pages 6 and 7.
2 Select SURROUND LEVEL from the AUDIO
menu. (see “SURROUND LEVEL” on the left
column)
SPEAKER
— Custom selection of audio output source
EFFECT
— Customizes surround sound effects
based on the program’s audio type
SURROUND LEVEL
— Speaker volume adjustment for
surround modes
Adjusting the Speaker Volume
for Customized Surround
Mode
; PRO-LOGIC
REAR
BALANCE
TEST TONE : OFF
CENTER
Move Select Exit MENU