To run the showfru command, To run the showfru, To run the showfru command” on – Sun Microsystems Sun Fire T1000 User Manual
Page 36
Advertising
24
Sun Fire T1000 Server Service Manual • January 2006
Note –
Some information might not be available when the server is in standby
mode.
▼
To Run the showfru Command
Note –
By default, the output of the showfru command for all FRUs is very long.
The showfru command displays information about the FRUs in the server. Use this
command to see information about an individual FRU, or for all the FRUs.
Note –
You do not need user permissions to use this command.
Advertising