Sun Microsystems Sun Fire T1000 User Manual
Page 44
32
Sun Fire T1000 Server Service Manual • January 2006
3. Reset the system so that POST runs.
The following example uses the powercycle command. For other methods, refer to
the Sun Fire T1000 Server Administration Guide.
4. Switch to the system console to view the post output:
Example of POST output:
sc> powercycle
Are you sure you want to powercycle the system [y/n]? y
Powering host off at MON JAN 10 02:52:02 2000
Waiting for host to Power Off; hit any key to abort.
SC Alert: SC Request to Power Off Host.
SC Alert: Host system has shut down.
Powering host on at MON JAN 10 02:52:13 2000
SC Alert: SC Request to Power On Host.
sc> console
SC: Alert: Host system has reset1
Note: Some output omitted.
0:0>
0:0>@(#) ERIE Integrated POST 4.x.0.build_17 2005/08/30 11:25
/export/common-source/firmware_re/ontario-fireball_fio/build_17/post/Niagara/erie/integrated
(firmware_re)
0:0>Copyright © 2005 Sun Microsystems, Inc. All rights reserved
SUN PROPRIETARY/CONFIDENTIAL.
Use is subject to license terms.
0:0>VBSC selecting POST IO Testing.
0:0>VBSC enabling threads: 1
0:0>VBSC setting verbosity level 3
0:0>Start Selftest.....
0:0>Init CPU
0:0>Master CPU Tests Basic.....
0:0>CPU =: 0