To remove the server from a rack – Sun Microsystems Sun Fire T1000 User Manual
Page 67
Chapter 3
Removing and Replacing FRUs
55
▼
To Remove the Server From a Rack
If the server is installed in a rack with the extendable slide rails that were supplied
with the server, use this procedure to remove the server chassis from the rack.
1. (Optional) Issue the following command from the ALOM SC prompt to locate the
system that requires maintenance:
Once you have located the server, press the Locator button to turn it off.
2. Check to see that no cables will be damaged or interfere when the server chassis
is removed from the rack.
3. Disconnect the power cord from the power supply.
4. Disconnect all cables from the server and label them.
5. From the front of the server, unlock both mounting brackets (
) and pull
the server chassis out until the brackets lock in the open position.
FIGURE 3-1
Unlocking a Mounting Bracket
sc> setlocator on
Locator LED is on.