Sony IPELA NSR-100 - Manual (Page 117)

117
Chapter 5 Settings
Pulse Setting
Configure this setting when you wish to specify a pulse duration and input a
pulse.
Pulse
Select this check box when you wish to specify a pulse duration and input a
pulse.
If you select this check box, enter a value for [Pulse Duration].
Pulse Duration
Enter the duration in milliseconds to sustain pulse input once it is turned on.
For details on signal specifications, see the operating instructions for the
camera and sensor.
Sequential
Select this option to detect specific phenomena by applying the filters in
sequential order.
The filters are applied sequentially from the left.
When this option is selected, you can set the time and sequence in which to
apply the filters.
[Sequential] cannot be specified when setting an “Unattended” package.
Parallel
Select this option to detect specific phenomena by applying all detection criteria
simultaneously.
Caution
To switch between [Sequential] and [Parallel], the
button for each filter and inactive area must be
turned off. When the button is (On), click it to
turn it (Off).
To enable this filter, select the check box beside the filter name.
1
2
3