Sony IPELA NSR-100 - Manual (Page 38)

38
Chapter 2 Initial Configuring the System
6
Click [OK].
RAID reconstruction for data volume and full system restoration begins.
This process can take up to about 5 hours. A progress bar appears during the
process.
When the process successfully completes, a notification screen appears.
Example: For an NSR-50 with RAID 1 selected
7
Press Enter after the process completes and the message [Press any key to
continue!] appears.
The screen returns to the DOM menu.
8
Click [Reboot].
The NSR reboots, and the Setup Wizard appears.