Sony IPELA NSR-100 - Manual (Page 32)

32
Chapter 2 Initial Configuring the System
Note
Use only alphanumeric characters, underscores (_), and hyphens (-).
When you click [Accept], the [Setup Menu] screen returns.
21
Select the [NTP], and then click [Select].
The [NTP Setting] screen appears.
22
When you want to acquire the current time from an NTP server, select
[Enable], and enter the NTP server IP address, then click [Accept].
When you do not want to acquire the current time from an NTP server,
select [Disable] and then click [Accept].
When you click [Accept], the [Setup Menu] screen returns.
23
Select the [SNMP], and then click [Select].
The [SNMP Menu] screen appears.