Sony DPP-FP55 - Manual (Page 63)

63 GB
Troubleshooting
Symptom
Some images in
the image list
are not
displayed or not
printed even if
they are
displayed.
Cause/Solutions
c If the image is displayed but cannot be
printed, the file used for printing is
damaged.
c If there are no images stored in the
memory card or an external device, the
“No image file” message appears.
c If an image is not compatible with DCF
(Design rule for Camera File system), it
may not be printed with the printer even
if it is displayed on the PC monitor.
c If the mark shown on the left is
displayed, the image may be a JPEG file
created with your computer, or the
thumbnail data is not contained.
Select the mark and press
(zoom in)
repeatedly to display its image preview.
If an image is displayed, you can print
the image. If the same mark is displayed
again, the image is of incompatible file
format and you cannot print it with the
printer.
c If the mark shown on the left is
displayed, the image is of compatible file
format but its thumbnail data or the data
itself cannot be opened.
Select the mark and press
(zoom in)
repeatedly to display its image preview.
If an image is displayed, you can print
the image. If the same mark is displayed
again, you cannot print it with the
printer.
c The printer can display, save, delete or
handle up to 9 999 image files. If there
are more than 9 999 images stored in a
memory card or an external device, use
the PC or PictBridge mode to display and
handle the remaining images.
Check
• Are thumbnail images
displayed in the image
list?
• Does the mark
displayed below
appear in the image
list?
• Was the image created
on your PC?
• Does the mark
displayed below
appear in the image
list?
• Are there more than
9 999 images saved in
the memory card or an
external device?