Sony DPP-FP55 - Manual (Page 86)

86 GB
• Do not use or store the “Memory Stick” under
the following conditions:
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun or/
and in the summer, the outdoors exposed
to direct sunlight, or a place near a heater.
– Humid locations or locations with corrosive
substances present
About the SD card
The SD card slot of the printer allows you
to use an SD memory card
*1 and MMC
standard memory card *2 .
*1 The printer supports FAT32. The printer has
been demonstrated as operable with an SD
card with a capacity of 2 GB or smaller. To use
a miniSD card, you need an adaptor.
*2 The printer has been demonstrated as
operable with an MMC standard memory
card with a capacity of 128 MB or smaller .
We do not guarantee proper operations for
all types of SD cards/MMC standard
memory cards.
Notes on use
• When using a card, make sure to check correct
insertion direction of the card and correct
insertion slot.
• You cannot read or write the data subject to
the copyright protection. (SD card)
• Do not strike, drop, or bend a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Avoid using a card in areas subject to high
humidity, since it may be easily affected by
the humidity.
• Do not use or store a card in a location subject
to:
– extremely high temperature such as the hot
inside of a car or the outdoors exposed to a
direct sunlight, or a place near a heater.
– direct sunlight
– high humidity or corrosive substances
– static electricity or electrical noises
• When you carry or store a card, put it in the
case supplied with it.
• Do not remove a card or turn off the printer
while the printer is reading or writing data
and the access indicator is flashing.
Otherwise, data may be rendered unreadable
or erased.