Sony DPP-FP55 - Manual (Page 85)

85 GB
Additional information
What is “MagicGate”?
“MagicGate” is the general name of a
copyright protection technology developed
by Sony. This technology provides
authentication and encryption; mutual
confirmation is performed between the
“Memory Stick” media and the
“MagicGate” compliant device that the
other can record and play the copyright-
protected data correctly. When the
authentication is established, the data
encryption is performed.
When the data is played, the
authentication is also performed. Only
when authentication is established, the
data is decrypted to the original status and
played. Copyright-protected data cannot
be played with a device other than
authenticated ones.
The printer is not equipped with the
“MagicGate” technology and cannot read
or write the data subject to the
“MagicGate” copyright protection.
Notes on use
• Do not insert multiple “Memory Stick” at the
same time, which may cause trouble with the
printer.
• When using a “Memory Stick”, make sure to
check correct insertion direction. Wrong usage
may cause trouble with the printer.
• Do not place the “Memory Stick Duo” or
“Memory Stick Micro” within the reach of a
small child to prevent him from swallowing it
by accident.
• Avoid removing the “Memory Stick” from the
printer while the printer is reading or writing
data.
• Data may be damaged in such occasions:
– “Memory Stick” is removed or the printer
is turned off during a read or write
operation.
– “Memory Stick” is used in a location
subject to static electricity or electrical
noises.
• We recommend that you save backup of the
important data.
• The data processed with the computer may
not be played with the printer.
• When you format a “Memory Stick”, use the
format function of the printer or your digital
camera. If you format a “Memory Stick” with
your computer, images may not be displayed
properly.
• When you format a “Memory Stick”, all the
data including the protected image files will
be erased. To avoid erasing important data by
accident, make sure to check the content
before formatting.
LOCK LOCK
Write
protect
position Write
enable
position
Connector
Place the label here.
Write-protect switch
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
• When you use a “Memory Stick Duo” without
the write-protect switch, be careful not to edit
or delete the data by accident.
• When you slide the write-protect switch of the
“Memory Stick Duo”, use a thin-pointed
device.
• Do not attach any other material than the
supplied label on the labeling position. When
you attach the supplied label, be sure to attach
it to the labeling position. Be careful that the
label does not stick out.
• When you write on the memo area of the
attached label, do not write forcefully.
• When you carry or store the “Memory Stick”,
put it in the case supplied with it.
• Do not touch the terminal of the “Memory
Stick” with your hand or a metal object.
• Do not strike, bend or drop the “Memory
Stick”.
• Do not disassemble or modify the “Memory
Stick”.
• Do not expose the “Memory Stick” to water.
Continued