Sony DPP-FP55 - Manual (Page 76)

76 GB
Symptom
Colors are not
reproduced
correctly.
Preview image
does not reflect
the print
settings in the
“Graphics” tab
of the “Sony
DPP-FP55
Properties”
dialog box.
Print quantity
specified in the
“Paper/Output”
tab of the “Sony
DPP-FP55
Properties”
dialog box does
not take effect.
Check
• Is “Exif Print” checked in
the “Graphics” tab of the
“Sony DPP-FP55
Properties” dialog box?
• Is “ICM” selected in the
“Graphics” tab of the
“Sony DPP-FP55
Properties” dialog box?
Cause/Solutions
c The Exif Print setting in the “Color
reproduction/Picture quality” section
supports the Picture Motion Browser
only. To print from other application,
uncheck “Exif Print”.
c The ICM setting may be valid only
when you are using an ICM-compliant
application. Check to see if the
application software you are using
supports ICM.
c The print settings adjusts the printer
itself and cannot influence the preview
image.
c Depending on the application you use,
the print quantity setting of the
application you use may have priority
over the setting specified in the printer
driver dialog box.