Sherwood R-903R - Manual (Page 33)

ENGLISH
33
ENGLISH
LISTENING TO RDS BROADCASTS(FM ONLY)
While displaying “TP SRCH”. 2
While displaying “PTY SRCH”, select the
desired program type. 2
While displaying “RDS SRCH”, 2
• Use this function to automatically search and
receive the stations offering RDS services.
THIS IS ADDITIONAL FUNCTION FOR R-903R TUNER ONLY
RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is
capable of translating these signals and putting the information on the display. These codes contain the following informations.
Program Service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).
• Use this function to automatically search and receive
the stations broadcasting the desired program type.
• “PTY SRCH” is displayed.
• Each time this button is pressed, one of 32
different types of programs is selected.
(NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M,
CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M, OLDIES, FOLK M, DOCUMENT, TEST, ALARM, NONE)
• When “PTY SRCH” is not displayed, repeat again
from the above step 1.
• Each time this button is pressed, the search mode
changes as follows;
RDS SRCH TP SRCH PTY SRCH OFF
In the FM mode, select the RDS search mode. 1
RDS search
PTY search
In the FM mode, select the TP search mode. 1
• Use this function to automatically search and receive
the stations broadcasting the traffic program.
• “TP SRCH” is displayed.
TP search
• The tuner automatically searches stations offering RDS
services and the station name is displayed.
• If the station found is not the desired one, press the
ADJUST/TUNE/PRESET UP(>/ /+) or DOWN(</
/-) button again while the RDS indicator is flickering.
• If no other RDS station is found, “NO RDS” is
displayed.
• When “RDS SRCH” is not displayed, repeat again from
the above step 1.
• The tuner automatically searches for stations
broadcasting the traffic program.
• “NO TRAFF”is displayed if the signal is too weak or
there are no stations broadcasting the traffic program.
• When “TP SRCH” is not displayed, repeat again from
the above step 1.
In the FM mode, select the PTY search mode. 1
SEARCH M.
or
ADJUST
TUNING/PRESET
TUNE
-, +
PRESET
-, +
or
ADJUST
TUNING/PRESET
TUNE
-, +
PRESET
-, +
SEARCH M.
SEARCH M.
PTY SELECT