Sherwood R-903R - Manual (Page 35)

35
ANALOG AUDIO/VIDEO RECORDING
Start recording on the TAPE. 2
Select the desired input as a recording
source except for TAPE.
1
Recording with TAPE
Select VIDEO 2 or VIDEO 3 as a recording
source.
1
Dubbing from video components onto
VIDEO 1
Select AUX as an audio recording source.
CD player should be connected to AUX jacks.
1
Dubbing the audio and video signals
separately onto VIDEO 1
Start play on the desired input. 3
Press the OSD button on the remote control unit
and select FUNCTION SELECT
VIDEO
SELECT VIDEO 2.
(Refer to page 39.)
2
Start recording on the VIDEO 1.
2
Start play on the VIDEO 2 or the VIDEO 3.
3
• The audio and video signals from the VIDEO 2 or the
VIDEO 3 will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the speakers.
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal separately onto
VIDEO 1.
• The analog signals (except front L/R channel) from the 7 CH DIRECT inputs as well as the digital signals from the coaxial or
optical digital input cannot be recorded.
• The volume and tone (bass, treble) settings have no effect on the recording signals.
INPUT SELECTOR
TUNER
AUX
VIDEO1
VIDEO2
VIDEO3
or
INPUT SELECTOR
VIDEO2
VIDEO3 or
INPUT SELECTOR AUX
or
ENGLISH
OSD