Normal recording, Clog detection, Setting the clog detection – Sharp SRT-8040 User Manual

Page 22: Action to take when the video signal deteriorates

Advertising
background image

NORMAL RECORDING

Clog Detection

This VCR is equipped with a clog detection function.

The recording quality is monitored automatically. When
the heads are dirty and the recording quality
deteriorates, the output at the WARNING OUT terminal
becomes 0 V (Low) (Refer to “WARNING OUT Terminal”
on page 47), the “

m

” indicator flashes on the digital

display.

Setting the clog detection

1

Press the MENU button to display the MAIN MENU.

2

Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.

ø

The (GENERAL SET) menu appears.

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@01:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

CLOG@DETECT.@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

VERTICAL@SYNC@@@@Y

TAPE@@@@@@@@@@@@@T-160

3

Turn the JOG dial until the “CLOG. DETECT.”
setting is highlighted, then turn the SHUTTLE ring
clockwise.

4

Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.

N. . . . . . . Recording quality is not monitored

Y. . . . . . . Recording quality is monitored

5

Press the MENU EXIT button.

NOTES:

œ

To cancel the “

m

” indicator display and reset the

WARNING OUT terminal output, press the STOP
button.

œ

Clog detection is not possible if recording in 8-hour
mode.

Action to Take when the Video Signal
Deteriorates

If there is no video signal during recording or when a
menu is not displayed (in stop, fast forward or rewind
modes, etc.), “VIDEO LOSS” can be displayed
on-screen. If in the (WARNING OUT/CONTROL SET)
menu, “VIDEO LOSS” is set to “Y”, the output at the
WARNING OUT terminal becomes 0V (Low) (Refer to
“WARNING OUT Terminal” on page 47).

1

Press the MENU button to display the MAIN MENU.

2

Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.

ø

The (GENERAL SET) menu appears.

3

Turn the JOG dial until the “VIDEO LOSS” setting is
highlighted, then turn the SHUTTLE ring clockwise.

4

Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.

N . . . . . . . . . The video loss warning is not

active.

Y. . . . . . . . . . The video loss warning is active.

5

Press the MENU EXIT button.

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

English

21

Advertising
This manual is related to the following products: