Sanyo PLC-WXU300K - Manual (Page 22)


Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 70-71.
Main Menu Sub-Menu
 Image select
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard
and image 1 - 4 (p.33).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.40).
 Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., White balance (R/G/B),
Sharpness
and Gamma] (pp.34-35).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., White balance (R/G/
B)
, Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42).

PC adjust
Select Fine sync ., Total dots, Horizontal, Vertical, Clamp, Display area H, Display area V and Auto PC adj . to adjust
the parameters to match with the PC input signal format (pp.30-32).
 Screen
For computer source, used to adjust size of the image [Normal, True, Full, Custom and Digital zoom +/– ] (pp.35-36). For
Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.43).

Input
Used to select an input source from Computer 1, Computer , HDMI, Video or S-video (pp.27-28,37-38).
 Sound
Used to adjust the volume or mute the sound (p.24).
 Information
Display the input source information: Input, H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter
, Power management, Keylock, PIN code lock and Remote control (p.60).
 Guide
The key operation is displayed.
 Setting
Used to set the projector’s operating configurations (pp.44-59).
 Network
See owner’s manual of “Network Set-up and Operation”.
Basic Operation









