Sanyo PLC-WXU300K - Manual (Page 33)

33
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Image 3
Image Mode Selection
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic, Standard,
Real
, Blackboard (Green), Colorboard, Image 1, Image ,
Image 3
, and Image 4 by pressing the IMAGE button on the
remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard (Green)
Image 1–4
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Dynamic
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the Image
adjust Menu (see pages 34-35). This Image memory is
provided in each computer, component, S-video and video
input source.
1

Menu Operation
Colorboard
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
select
and then press the Point ► or the SELECT
button.
Use the Point
▲▼ buttons to select the desired item
and then press the SELECT button.
Computer Input