Sanyo PLC-WXU300K - Manual (Page 27)

7
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button
on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu

3
Input Source Selection (Computer 1: RGB )
Computer Input
 Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
Computer
1
Top Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Computer 1.
When Computer 1 is selected, press the Point ►
button to access the submenu items. Use the Point ▲
▼ buttons to select the RGB input source and then
press the SELECT button.
COMPUTER 1 button
Remote Control
Computer 1(RGB)
Computer 1(Scart)
INPUT button
Computer 1
HDMI
Computer  
S-video
Video
 COMPUTER 
can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.