Sanyo PLC-WXU300K - Manual (Page 28)

8
Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Input Source Selection (Computer 
: RGB)
Direct Operation
Menu Operation
 Note:
When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.45).
COMPUTER  button
Top Control Remote Control
1

Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Computer  and
then press the SELECT button.
Input Menu
Computer (RGB)
3
When Computer  is selected, analog RGB input
source will be selected directly.
INPUT button
Computer Input
 COMPUTER  can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Computer 1
HDMI
Computer  
S-video
Video