Sanyo PLC-WXU300K - Manual (Page 43)

43
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Size Adjustment
Screen Menu
0
0
Off
0
0
Video Input
Normal
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Custom
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is fixed.
Scale V
appears dimmed and becomes
unavailable. Adjust the Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V . . . . . Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale to all the inputs.
Press the SELECT button at Common
to display a confirmation box. To save
the scale, press the SELECT button
at yes, When Custom is selected, the
saved scale is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
Note:
• When no signal is detected, Normal is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V
is limited depending on the
input signal.
• Wide, Zoom and Natural wide cannot
be operated when 70p, 1035i or 1080i
is selected in the AV System Menu
(p.39).
Wide
Provide the image at the 16:9 wide screen ratio. Only for
4:3 video aspect ratio signals.
Full
Provide the full screen image.
Zoom
Pan the horizontal direction of the image and cut the vertical
direction of the image to fit the screen size (16:9). Only for
4:3 video aspect ratio signals.
Natural wide
Modify the 4:3 aspect ratio image to fit the screen size(16:9
aspect ratio) by stretching the image to make it look natural.
1

Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item and
then press the SELECT button.