Sony PDW-1500 - Manual (Page 27)

Chap
ter
2
N
a
mes
a
nd F
unc
tions
of
P
a
rt
s
27
2-2 Rear Panel
assigned to audio channel 1or 3, and whether the signal
input to connector 2/4 is assigned to audio channel 2 or 4.
You can set the reference input level with the maintenance
menu item “AUDIO CONFIG.” (Factory default setting:
+4 dB)
For details of the maintenace menu, see 6-4 “Maintenance
Menu” on page 70.
b AUDIO OUT (analog audio signal output) 1/3, 2/4
connectors (XLR 3-pin, male)
These are analog audio signal output connectors.
The connector 1/3 outputs the signal from audio channel
1or 3, and the connector 2/4 outputs the signal from audio
channel 2 or 4. You can set the output level with the
maintenance menu item “AUDIO CONFIG.” (Factory
default setting: +4 dB)
For details of the maintenace menu, see 6-4 “Maintenance
Menu” on page 70.
2 Digital audio signal inputs/outputs
a DIGITAL AUDIO (AES/EBU) IN (digital audio
input) 1/2, 3/4 connectors (BNC type)
These input AES/EBU format digital audio signals. The
left connector (1/2) corresponds to audio channels 1 and 2,
and the right connector (3/4) corresponds to audio
channels 3 and 4.
b DIGITAL AUDIO (AES/EBU) OUT (digital audio
output) 1/2, 3/4 connectors (BNC type)
These output AES/EBU format digital audio signals. The
left connector (1/2) corresponds to audio channels 1 and 2,
and the right connector (3/4) corresponds to audio
channels 3 and 4.
3Analog video signal inputs/outputs
a VIDEO IN (analog video input) connectors (BNC
type)
These are composite video signal input connectors.
The two connectors form a loop-through connection; when
a signal is input to the left connector, the same signal is
output from the right connector (
) forming a bridge
connection to the connected device.
When no connection is made to the right connector, the left
connector is automatically terminated with an impedance
of 75 ohms.
b VIDEO OUT (analog video output) 1, 2 (SUPER)
connectors (BNC type)
These are composite video signal output connectors.
The output from the 2 (SUPER) connector can have time
code, menu settings, alarm messages, and other text
information superimposed.
4Time code inputs/outputs
a TIME CODE IN connector (BNC type)
This inputs an SMPTE time code generated by an external
device.
b TIME CODE OUT connector (BNC type)
This outputs the following time code, depending on the
operating state of the PDW-1500.
During playback: playback time code
During recording: the time code from the internal time
code generator or the time code input to the TIME
CODE IN connector.
When extended menu item 611 “TC OUTPUT PHASE IN
EE MODE” is set to “mute,” no time code is output.
1/2 IN 3/4 1/2 OUT 3/4
DIGITAL AUDIO (AES/EBU)
1 DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4 connectors
2 DIGITAL AUDIO (AES/EBU)
OUT 1/2, 3/4 connectors
1 2
(SUPER)
VIDEO IN VIDEO OUT
1 VIDEO IN connectors
2 VIDEO OUT 1, 2 (SUPER) connectors
IN OUT
TIME CODE
1 TIME CODE IN connector
2 TIME CODE OUT connector