Sony PDW-1500 User Manual
Page 60
Ch
apt
er 6
Men
u
s
60
6-3 Extended Menu
131
AUDIO VOLUME
Select whether each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective
to control each channel.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When “all” is selected, the ALL indicator to the right of the ALL/CH-1
adjustment knob lights up.
Menu items in the 100s, relating to the control panels
Item number Item name
Settings
Menu items in the 200s, relating to the remote control interface
Item number
Item name
Settings
214
REMOTE INTERFACE
When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN: Device connected to the REMOTE connector.
i.LINK: Device connected to the S400 (i.LINK) connector.
Menu items in the 300s, relating to editing operations
Item number Item name
Settings
301
VAR SPEED RANGE FOR
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–1~+2: –1 to +2 times normal speed.
wide: –1.15 to +2.20 times normal speed.
308
SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when the input video signal is unstable (forced
NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
310
REC INHIBIT
Select whether recording is inhibited.
off: Do not inhibit recording.
on: Inhibit recording.
320
DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
335
OUTPUT REFERENCE SEL
Select the reference signal of this unit.
ref: Use the signal input to the REF.VIDEO IN connector as the
reference signal.
auto: According to the operation mode, automatically select either the
signal input to the REF.VIDEO IN connector or the input video signal
selected with the VIDEO INPUT SEL button as the reference signal.
For more details, see the following item “External Sync Signal for the
Internal Reference Video Signal Generator.”
The input digital audio signals and video signals must be synchronized
with the reference signal input to the REF.VIDEO IN connector.