Sanyo PDG-DHT8000L - Manual (Page 42)

4
AV SySTEM MENU (VIDEO OR S-VIDEO)
AV SySTEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer
to the desired system and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, 1080p, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video jack or S-Video jack
y, Pb/Cb, Pr/Cr jacks
The projector automatically detects an incoming video system,
and adjusts itself to optimize its performance.
Auto
AV System Menu icon
The selected system is displayed
Move the pointer to the desired
system and press the SELECT button.
AV System Menu icon
The selected system is displayed.
Move the pointer to the desired
system and press the SELECT button.
Video Input
✔ Note:
• The AV System menu cannot be selected when
selecting RGB(Scart).