Sanyo PDG-DHT8000L - Manual (Page 61)

61
Video delay control
When you want to make a digital processing of a
projected image faster, set this function.
Use the Point 7 8 buttons, select an item of Off/Low/Mid/
High.
Digital processing speed becomes fast by order of Low a
Mid a High. High is the fastest.
✔ Note:
• The following functions are not available respectively
when Video delay control is set to Low/Mid/High.
Low ........Keystone can not be selected.
Mid ......... Progressive and Noise reduction can not
be selected.
High ....... Keystone, Progressive and Noise
reduction can not be selected.
• When Video delay control function is set to Low or
High and press the KEYSTONE button on the remote
control, Fig.1 will be displayed on the bottom left
screen.
Fig .1
Closed caption
Closed Caption is a function that displays the audio portion
of a TV program as text on the screen. If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point 7 8 buttons to select
Off, CC1, CC2, CC3 or CC4.
If the Closed caption is not clear, you can change the text
from Color to White.
✔ Note:
The Closed caption is available only under the situation
below;
• When the input signal is NTSC of composite and S-
video, and the system is set according to the signal or
set on Auto.
• The system must be set on NTSC or Auto in Video
System Selection. (p.42)
• The item of Closed caption is displayed in gray while it
is not available.
• Closed caption is unavailable when On-Screen Menu
and P-timer are displayed. Frame lock
This function allows you to adjust the frame lock
frequency depend on an input source such as a special
frame frequency of video camera.
Use the Point 7 8 buttons to select from Auto or Manual
60.00Hz/59.94Hz/50.00Hz/30.00Hz/29.97Hz/25.00Hz/
23.98Hz).
Auto ..................... Factory default setting.
Manual xx.xx Hz .. Use the Point 7 8 buttons to select the
reference frame frequency which is the
same as the frame frequency of the video
camera.
[ xx.xxx ] Hz ......... Use the Point 7 8 buttons to search the
reference frame frequency. When this item
is adjusted, the above column will change to
[Manual, - - -].
Reset ................... Select ‘Reset’ and press the SELECT button.
Then the confirmation message appears.
Press the SELECT button at [Yes] to reset to
the factory default value.
Setting