Sanyo PDG-DHT8000L - Manual (Page 60)

60
Setting
Shutter
Shutter function is available to block out light to the
screen, so that the screen can be used for the other
presenters.
Prohibits the shutter operation from the remote control and
the projector's side control.
Remote control . . . Selecting "On" prohibits the shutter
operation from the remote control.
Projector . . . . . . . . Selecting "On" prohibits the shutter
operation from the side control.
It is possible to prohibit the shutter operation from both of the
remote control and the side control.
Protection
Management
The Shutter Management function turns off the projection
lamp when the projector is left with the shutter closed and
the set time has passed away. The count-down time can be
set between 5 and 480 minutes. When the count-down time
has elapsed, the shutter will be opened up automatically and
the lamp will be turned off to cool itself down. The SHUTTER
indicator is blinking blue during this cooling-off period. When
the lamp has been fully cooled down, the POWER indicator
turns green lighting and the SHUTTER indicator keeps
blinking. Should the ON / STAND-BY button be pressed in
this condition, the projection lamp will be turned on and the
SHUTTER indicator turns off.
✔ Note:
• The Factory default value is set to 180
minutes for the count down time.
• The Shutter Management function cannot be
halted.
Shutter
Set the red frame pointer
to the item and press the
SELECT button.
Effect
Choose the image effect at opening or closing the shutter
from the following options.
On ............. The Image will fade in and out at opening or
closing the shutter.
Off ............. Disable.
Release key
Choose the active buttons to release the shutter when the
shutter is closed from the following options.
Any ............ By pressing any buttons on the remoter control
and the side control when the shutter is closed,
the shutter will be released.
SHUTTER .. Only the SHUTTER button on the remote
control and the side control can be released the
shutter when the shutter is closed.
Only the following buttons are active when the
shutter is closed;
- INPUT button and INPUT 1/2/3/4 button
- ON/STAND-BY button