Sony STR-DH710 - Manual (Page 22)

22 GB
Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• Connect image display components such as a TV
monitor or a projector to the HDMI TV OUT or
MONITOR OUT jack on the receiver. You may
not be able to record even if you connect recording
components.
• Depending on the status of the connection between
the TV and the antenna (aerial), the image on the
TV screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
4a: Connecting the audio
components
The following illustration shows how to
connect a Super Audio CD player, CD player,
CD recorder and DIGITAL MEDIA PORT
adapter. Before connecting cords, be sure to
disconnect the AC power cord (mains lead).
AM
EZW-T100 ANTENNA
DC5V
0.7A MAX IN 3 IN 2 IN 1
IN
OPTICAL
MONITOR
OUT
AUDIO
OUT
AUDIO
IN
AUDIO
IN
VIDEO
IN
VIDEO
OUT
Y
P B /
C B
P R /
C R
L
R
DIGITAL
SAT
CAT
IN
OPTICAL
SA-CD/CD/CD-R SAT/CATV SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
AUDIO
OUT
VIDEO
OUT
AUDIO
IN
VIDEO
IN
VIDEO 1
MONITOR COMPONENT VIDEO
ASSIGNABLE (INPUT ONLY)
TV
TV
DMPORT
AUDIO
OUT
AUDIO
IN
Super Audio
CD player,
CD player,
CD recorder
A Audio cord (not supplied)
B Video cord (not supplied)
A
DIGITAL MEDIA
PORT adapter
B
TV