Sony STR-DH710 - Manual (Page 48)

48 GB
2
Tune in the station that you
want to preset using Automatic
Tuning (page 46) or Direct
Tuning (page 46).
Switch the FM reception mode, if
necessary (page 46).
3
Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
4
Press and hold SHIFT, then
press the numeric buttons to
select a preset number.
You can also press PRESET + or
PRESET – to select a preset number.
5
Press and hold SHIFT, then
press ENTER.
You can also use MEMORY/ENTER on
the receiver.
The station is stored as the selected preset
number.
6
Repeat steps 1 to 5 to preset
another station.
1
Press TUNER repeatedly to
select the FM or AM band.
2
Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
You can also press and hold SHIFT and
then press the numeric buttons to select
the preset station you want. To enter the
selection, press and hold SHIFT then
press ENTER.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“PRESET”.
3 Press TUNING + or TUNING – to select the
preset station you want.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Tune in the preset station you
want to create an index name
for (page 48).
3
Press AMP MENU.
4
Press V/v repeatedly to select
“TUNER”, then press or b.
Tuning to preset stations
Naming preset stations
1 2 3 4 5 27 ...
30 29 28