Sanyo PDG-DWL2500 - Manual (Page 10)

10
Part Names and Functions
q Top Controls and Indicators
w Infrared Remote Receiver
e Lamp Cover (Lamp and Air Filter)
r Adjustable feet
t Speaker
y Exhaust vent
u Air Intake vent
i Projection Window
4 Note:
Do not touch the projection window, otherwise,
the window may be soiled and the image can be
smudgy.
o Focus Lever
!0 LAN Connection Terminal
!1 Terminals and Connectors
!2 Power Cord Connector
!3 Security Bar
4 Note:
!0 LAN Connection Terminal is for the Network
function. Refer to the owner’s manual of “Net-
work Set-up and Operation”.
[ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*
Kensington is a registered trademark of ACCO
Brands Corporation.
Front
Rear
CAUTION
The infrared remote receiver sticks out of the
cabinet surface. If the infrared remote receiver
is put on the wall or floor directly, the infrared
remote receiver may damage.
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
q w e
r
r
y
y
t
!1 !2
i o
!3
u
[
!0
WARNING
The projection window becomes very hot during
use. Do not put your hand or objects on the
projection window. High temperature from light
beam may damage light-blocking objects and
result in fire hazard.