Sanyo PDG-DWL2500 - Manual (Page 24)

2
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 72-73.
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
① Input Used to select an input source from Computer 1, Computer 2, HDMI, Video or
S-video. (pp.30-31, 41-42)
② PC adjust Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Current mode and
Clamp to adjust the parameters to match with the PC input signal format. (pp.33-35)
③ Image select Used to select an image mode from among Dynamic, Standard, Real, Cinema and
Image 1-. (p.36)
④ Image adjust For computer source, used to adjust computer image [Contrast, Brightness, Color
temp ., White balance (Red/Green/Blue), Sharpness and Gamma]. (p.37)
For video or HDMI source, used to adjust picture image [Contrast, Brightness, Color,
Tint, Color temp ., White balance (Red/Green/Blue), Sharpness, Gamma, Noise
reduction and Progressive]. (pp.44-45)
⑤ Screen For computer source, used to adjust size of the image [Normal, Full, Wide (16:9), Zoom,
True, Custom, Digital zoom +/–, Keystone, Ceiling, Screen aspect and Colorboard].
(pp.38-40)
For video or HDMI source, used to set size of image [Normal, Full, Wide (16:9),
Zoom, Natural wide, Custom, Keystone, Ceiling, Screen aspect and Colorboard].
(pp.46-47)
⑥ Sound Used to adjust the volume or mute the sound. (p.27)
⑦ Setting Used to set the projector’s operating configurations. (pp.50-62)
⑧ Information Display the input source information: Input, H-sync freq ., V-sync freq ., Screen,
Language, Lamp status, Lamp counter, Power management, Key lock, PIN code
lock, Remote control, and SERIAL NO .. (p.63)
⑨ Network See owner’s manual of “Network Set-up and Operation”.
⑩ Guide The key operation is displayed.
Basic Operation