Sanyo PDG-DWL2500 - Manual (Page 59)

59
Setting
This function allows you to use the Key lock and the PIN
code lock function to set the security for the projector
operation.
Key lock
Key lock
PIN code lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
. . . . . Unlocked.
. . . . . Lock the operation of the top control.
To unlock, use the remote control.
. . . . . Lock the operation of the remote
control. To unlock, use the top control.
If the top control accidentally becomes locked and
you do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off . . . . .Unlocked.
On 1 . . . . .Enter the PIN code every time turning on
the projector.
On 2 . . . . .Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a
PIN code.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The "1234" is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box
appears.
PIN code lock
Security (Key lock and PIN code lock)
When the projector is locked with the
PIN code, the Security icon appears
on the guide.