Sanyo PDG-DWL2500 - Manual (Page 28)

28
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select the
input source. See pages 30-31, 41-42 for details.
Display the input source information: Input, H-sync freq .,
V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock,
Remote control and SERIAL NO .. (p.63)
Press the D.ZOOM ed buttons on the remote control to
enter to the D. zoom +/– mode. See page 39 for details.
Remote Control
FREEZE
button
D .ZOOM
buttons
LAMP
button
4 Note:
See the next page for the description of
other buttons.
COMPUTER 1/2
buttons
VIDEO
button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
INFO .
button
S-VIDEO
button
COMPONENT
button
HDMI
button
3D button
Select 3D mode from 3D Off, 3D (Sync . 1) and 3D (Sync .
2) (p.48-49)
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
Fig .1
4 Note:
When use the MUTE button to release the Freeze function,
the mute function can not be operated at the same time.
Normal ...... Normal brightness.
Eco ........... Lower brightness reduces the lamp power
consumption and extends the lamp life.
FREEZE buton
INFO . button
D .ZOOM ed buttons
LAMP button
3D button
COMPUTER 1, COMPUTER 2, HDMI buttons
VIDEO, S-VIDEO, COMPONENT buttons