Fading in or out, Recording from cds – Sony CDP-XE300 User Manual

Page 13

Advertising
background image

Recording From CDs

13

EN

Recording From CDs

Fading In or Out

You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector (for CDP-XE500).

Fading in or out at the point you want
(except for CDP-XE200)

Z

1

Press EDIT/TIME FADE repeatedly before you

start playing until “

” and “A” in the

indication appear in the display.

2

Press

0

or

)

to specify the playing time.

Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.

n

H A L F

˜

C-46

˜

C-54

˜

C-60

˜

C-74

˜

C-90

˜

- - . - -

N

(23.00) (27.00)

(30.00)

(37.00) (45.00)

When you select “HALF”

The player sets the playing time to a half of the total
playing time.

3

Press

·

to start playing.

At the specified time the play fades out and the
player pauses. “B” in the

indication appears

in the display.

4

To record on side B, reverse the tape and press

·

or

P

on the player to resume playing.

Again, the play fades out at the specified time.

To cancel Time Fade

Press EDIT/TIME FADE.

You can freely specify the playing time

See “You can freely specify the tape length” on page 12 .

You can change discs during Time Fade

If the play ends before the specified fade-out time, (for
example, when you record CD-singles on a tape) change
the disc. The specified fade-out time is counted only
during playing.

You can fade in to resume playing in Step 4

After you reverse the tape, press FADER on the remote.

Note

Time Fade will be cancelled if you press

0

or

)

during

the operation.

FADER

To

Start play fading in

End play fading out

Press FADER

During pause. The

Q

indication

flashes and play fades in.

When you want to start fading out.
The

q

indication flashes. The play

fades out and the player pauses.

Fading time lasts for 5 seconds. If you press FADER
during Music Scan (page 8), fading time changes to 2
seconds.

Fading out at the specified time (Time
Fade) (CDP-XE500 only)

You can have the player fade out automatically by
specifying the playing time. Once you set the time fade,
it works twice, that is, the play fades out at the end of
both sides of a tape.

EDIT/TIME FADE

0

/

)

·

Advertising
This manual is related to the following products: