Samsung SPH-I325 - Manual (Page 10)

2 Getting Started
3. Press to turn the device on.
•
Your device will turn on, search for
service, and then enter standby mode.
•
If your device is not yet activated, or if it
is locked, contact your service provider
to activate your device.
Initial Setup
After you have powered on your device, you may wish
to set some basic options. After the initial power-up,
your device will display the Windows Mobile® screen
where you will be guided through a series of setup
procedures.
1. From the initial screen, press Next (right
softkey) to begin the setup process.
2. Use both the navigation key and keypad to enter new values within the
date and time fields. See "Configuring the Time and Date" on page 45.
•
To toggle between AM and PM, highlight the AM/PM field and then
press either A (for AM) or P (PM) on the keypad.
3. Press Next (right softkey) to continue on to the password setup screen
where you can create a password, which must be used to access your
device’s features and data. See "Locking Your Device with a Password"
on page 47.
– or –
Skip to the next step if you do not wish to assign a password at this
time.
4. Select “Prompt if device unused for” and press . (Enabling this
option activates the remaining fields.)
5. Select each field and enter the desired information:
•
Minutes: to select the amount of unused time (idle) required before
you are prompted for a password.
•
Password type: to choose from one of the following PIN types:
• Simple PIN: must be at least four characters in length and cannot
contain a simple sequence such as 0000, 1111, or 1234.