Samsung SPH-I325 - Manual (Page 110)

102 Bluetooth
3. Highlight a device and press Menu (right softkey) > Edit.
4. Use the keypad and to change the device name and press Next
(left softkey).
5. Highlight an option and then press to check or uncheck the box for
the option.
6. Press Done (left softkey).
To delete a Bluetooth device from your list:
1. Press the Power button, select Wireless Manager and press .
2. Highlight the Bluetooth field and press Menu (right softkey) > Bluetooth
Settings.
3. Highlight a device and press Menu (right softkey) > Delete.
4. From the Confirm screen, press Yes (left softkey) to delete the device or
press No (right softkey) to cancel.
Beaming Files
Using an active Bluetooth connection, you can beam any data file (Contacts,
pictures, video, text, etc.) directly to another Bluetooth device. Both devices must
be active (
), with visibility turned on, and the recipient must accept the
incoming data.
When you send data to another user, it is up to the recipient to either accept the
incoming data or reject the connection. If you are sending a picture to a Bluetooth-
compatible printer, you may need the passcode to establish a connection.
Beaming Contacts via Bluetooth
1. Press Start > Contacts.
2. Select an entry and press Menu (right softkey) > Send Contact > Beam.
(Your device will search for and list all discovered Bluetooth devices.)
Note: Each device that appears in the above search will initially appear as
"Unknown device." After a short time the correct display names will appear.
3. Highlight a device and press Beam (left softkey) to send the name card
to this recipient. (The recipient’s device will display an onscreen
message asking whether they would like to receive and save your
Contact entry to their list.)