Samsung SPH-I325 - Manual (Page 133)

Service Features 125
Service
10. Enter your user name and password in the appropriate fields.
11. Press to check the “Save password” check box if you would like the
device to always remember your password during later access to this
email account.
12. Press Next (right softkey).
13. Enter the Outgoing (SMTP) mail server information.
14. Place a check mark on the appropriate fields by pressing .
•
Outgoing server requires authentication is used if you need to use a
password for outgoing mail in addition to incoming mail.
•
Use the same name and password for sending e-mail to use the
same user name and password for outgoing mail as for incoming
mail.
15. Press Next (right softkey).
16. Select the time interval in the Automatic Send/Receive field that you
would like for your device to send and check for new email.
17. Press Finish (right softkey).
Setting Up Exchange Server via ActiveSync
Email, Contacts, and other information can be synchronized wirelessly on your
device using the Microsoft Exchange Server.
To synchronize wirelessly using Microsoft Exchange Server:
•
Activate Data Services. Verify that the Data connection is correct. To enter
this information, press Start > More > More > Settings > Connections >
Dialup. (For more information, see "Installing ActiveSync on Your
Computer" on page 112.)
•
Create an email account as described in "Setting Up an IMAP or POP
Account" on page 123.
•
Work with your system administrator to collect the following information:
•
Exchange Server address and domain name
•
Your user name and password
1. Press Start > More (left softkey) > ActiveSync.
2. Press Menu (right softkey) > Add Server Source.
3. Enter the server address and press Next (right softkey). Remove the
check mark from 'This server requires an encrypted (SSL) connection'
if the server does not provide SSL.