Samsung SPH-I325 - Manual (Page 32)

24 Phone Basics
Plus (+) Code Dialing
When placing international calls, you can use Plus Code Dialing to automatically
enter the international access code for your location. This key can also be assigned,
not only for an International prefix, but also for a Country code and City code. See
"Assigning an International Country Code" on page 37.
1. Press and hold until a “+” is displayed on your device’s display
screen.
2. Dial the country code and phone number you’re calling, and press .
(The access code for international dialing will automatically be dialed,
followed by the country code and phone number.)
Dialing From the Contacts List
1. Press Contacts (right softkey) to list the entries.
2. Use the thumbwheel to scroll through the list of available contacts and
select the entry you want to call.
3. Press to dial the entry’s default phone number.
– or –
To dial another number assigned to the contact entry, select the name
and press
, and then select a number and press .
Using Speed Dialing
You can store up to 99 numbers in your device’s speed dial memory to make
contacting friends and family as easy as pressing a button or two. With this feature,
you can dial speed dial entries using one keypress for locations 1–9 or two
keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 1–9:
•
Press and hold the appropriate key for approximately two seconds.
•
If a number has been assigned to the current number, the display
confirms that the number has been dialed when it shows “Dialing...”.
•
If an application has been assigned to the number, the corresponding
application will launch.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds. The
display confirms that the number has been dialed when it shows
“Dialing...”.