Scientific Atlanta AllTouch 573480 - Manual (Page 13)

573497 Rev B 13
Reassigning mode buttons
Your mode buttons are
VCR
,
AUX
,
TV
, and
CBL
. They represent your VCR,
auxiliary device, television, and your home terminal/HCT. You can
reassign these buttons to control other devices if you choose. To reassign a
mode button, you copy the features of one button to another button.
For example, you may want your AllTouch Remote Control to control two
TVs instead of a TV and a VCR. You can turn your VCR button into a
second TV button.
To reassign a mode button, follow the steps below.
1. Press and hold
SET-UP
until the red light blinks twice.
2. Press
9 9 2
. The red light blinks twice.
3. Press the button you want to copy (source button).
4. Press the button you want to reassign (target button). The red
light blinks twice.
5. Set up the reassigned button with the correct device code to
control your device.
To set up for... Go to page...
TV 6
VCR 7
Other devices (AUX) 8
Cable 9
6. Write your changes and new codes in the following table and on
page 31.
Device VCR Aux TV CBL
Reassigned button
(New device)
Code