Sony SRP-X500P - Manual (Page 22)

SRP-X500P RS-232C Interface Manual
♦ Parameter
The parameter consists of 16 bytes of data in the order shown in the following table.
Byte Parameter
1st MIC 1/WL 1 INPUT LEVEL METER
2nd MIC 2/WL 2 INPUT LEVEL METER
3rd MIC 3 INPUT LEVEL METER
4th MIC 4 INPUT LEVEL METER
5th LINE INPUT L LEVEL METER
6th LINE INPUT R LEVEL METER
7th AV/RGB INPUT L LEVEL METER
8th AV/RGB INPUT R LEVEL METER
9th SPEAKER OUTPUT 1 LEVEL METER
10th SPEAKER OUTPUT 2 LEVEL METER
11th SPEAKER OUTPUT 3 LEVEL METER
12th SPEAKER OUTPUT 4 LEVEL METER
13th LINE OUTPUT 1 LEVEL METER
14th LINE OUTPUT 2 LEVEL METER
15th LINE OUTPUT 3 LEVEL METER
16th LINE OUTPUT 4 LEVEL METER
• LEVEL METER (1st-16th byte)
Indicates the level meter reading (in VU units).
The parameter and the level meter reading are as shown in the following table.
Level meter
reading Level meter
reading
Less than -30 0x30 (‘0’) -4 0x39 (‘9’)
-30 0x31 (‘1’) -3 0x3A (‘:’)
-20 0x32 (‘2’) -2 0x3B (‘;’)
-15 0x33 (‘3’) -1 0x3C (‘<‘)
-10 0x34 (‘4’) 0 0x3D (‘=‘)
-8 0x35 (‘5’) 1 0x3E (‘>‘)
-7 0x36 (‘6’) 2 0x3F (‘?’)
-6 0x37 (‘7’) 3 or more 0x40 (‘@’)
-5 0x38 (‘8’)
Page 22/43