SOYO SY-K7VTA - Manual (Page 42)

Hardware Installation SY-K7VTA
38
4. Cooling Fan Installation
(1) CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the 3-pin
fan cable to the CPUFAN connector on the Motherboard. The fan will stop
when the system enters into Suspend Mode. (Suspend mode can be
enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
CPU Cooling Fan
CPUFAN Pin Assignment
SENSOR 12V GND
1 3 2
CPU Cooling Fan
CPUFAN2 Pin Assignment
NC 12V GND
1 3 2